Difference between revisions of "UMEP/ Tutorials/ Footprint"

Jump to: navigation, search
(Contributors to the material covered)
(Data for Tutorial)
Line 25: Line 25:
  a) Reading -- [https://www.bb.reading.ac.uk Download BB  - week 5]  or [http://www.urban-climate.net/UMEPTutorials/Reading/DataReading.zip here]  
  a) Reading -- [https://www.bb.reading.ac.uk Download BB  - week 5]  or [http://www.urban-climate.net/UMEPTutorials/Reading/DataReading.zip here]  
b) London  - [http://www.urban-climate.net/UMEPTutorials/London/DataSmallAreaLondon.zip download]
b) London  - [http://www.urban-climate.net/UMEPTutorials/London/DataSmallAreaLondon.zip download]
[https://docs.google.com/forms/d/e/1FAIpQLSfH8eEly28SjtfvooWtJe95iRvLNV2tewNa3ZajrVFTXMKIfQ/viewform?formkey=dExvc3V1RDBqWmlIcURfLW5VOGtvQ0E6MQ&ifq To get the Password if not given it already]
==Prior to Starting==
==Prior to Starting==

Latest revision as of 09:07, 24 May 2018


Each meteorological instrument has a ‘source area’ (sometimes referred to as footprint), the area that influences the measurement. The shape and location of that area is a function of the meteorological variable the sensor measures and the method of operation of the sensor.

For turbulent heat fluxes measured with a sonic anemometer, extensive effort has been directed to try and model the ‘probable source area location’ (Leclerc and Foken 2014). Numerous models exist, but the Kormann and Meixner (2001) and Kljun et al. (2015) models are used in UMEP. Both models require input of information about the wind direction, stability, turbulence characteristics (friction velocity, variance of the lateral or crosswind wind velocity) and roughness parameters. Kljun et al. (2015) requires the boundary layer height.

Example result

Initial Practical steps

  • Start the QGIS software
  • If not visible on the desktop use the Start button to find the software (i.e. Find QGIS under your applications)
  • Select QGIS 2.16.3 Desktop (or the latest version installed)

When you open it on the top toolbar you will see UMEP.

UMEP location.png
  • If UMEP is not on your machine, download and install the UMEP plugin
  • Read through the section in the online manual BEFORE using the model, so you are familiar with it’s operation and terminology used.

Data for Tutorial

Use the appropriate data

a) Reading -- Download BB  - week 5  or here 

b) London - download

Prior to Starting

  1. Read through the section in the online manual BEFORE using the model, so you are familiar with it’s operation and terminology used:
  2. Download the Data needed for the Tutorial - you will be told which the appropriate data are:
  3. Load the Raster data (DEM, DSM, CDSM) files – DOES A CDSM EXIST? Yes for London, No for Reading
    • Go to: Layer > Add layer > Add Raster Layer > Locate downloaded files
Add Raster Layer.png
  • Have a look at the layers (see lower left) - if you untick the box filenames from the top you can see the different layers.

Source Area Modelling

  1. To access the Source area model or Footprint model:
Image Steps
  1. Click on Select Point on Canvas – then select a point (e.g. where an Eddy Covariance (EC) tower site is located)
  2. Select the appropriate surface elevation data file names
  3. Choose the model you wish to run (Kormann and Meixner 2001 or Kljun et al. 2015)
  4. Some initial parameters values are given - think about what would be appropriate values for your site and period of interest. The manual has more information (e.g. definitions) of the input variables.
    • The values are dependent on the meteorological conditions and the surface surrounding the site. The former obviously vary on an hour to hour basis (or shorter time periods), whereas the others are dependent on the wind direction and the fetch characteristics.
  5. Add a prefix and an output folder.
  6. Tick “add the integrated source area to your project”. This will provide visual information of the location of the source area (footprint)
  7. Run - If you get an error/warning message (model is unable to execute your request - as the maximum fetch exceeds the extent of your grid for your point of interest. measure the distance to the limit of your raster maps
    • To allow the model to work for the dataset with your point of interest you need to adjust the maximum fetch distance.
    • Locate the Measure tool.
    • Measure the distance to the point of interest to the boundary of the DSM data set.
    • Adjust the maximum fetch.
    • Click Run and wait for the calculations to finish.

The output is a source area grid showing the cumulative percentage of source area influencing the flux at the point of interest.

  • To display the legend: Double-click on the source area grid and then click OK without doing any changes. The source area display is showing up to 98 % of the cumulative area.
  • Other output: A text file giving both the input setting variables and the output morphometric parameters calculated based on the source area generated. More information is provided in the manual, row titled: “Output”

It is possible to input a text file to generate a source area based on morphometric parameters (e.g. an hourly dataset). However, for now you can moodify the input variables set in the interface. Format of file is given in the manual.

Iterative process

To work with a site with no value known a priori.

  1. Use the Image Morphometric Parameters Calculator (Point) tool in the UMEP plugin to select a point to get the initial parameter values:
    1. UMEP-> Pre-Processor -> Urban Morphology -> Image Morphometric Calculator
    2. Open the output files
  2. Anisotropic file – has the values in, e.g., 5 degree sectors – i.e. what you selected. This is appropriate if the area is very inhomogeneous.
  3. Isotropic file - has the average value for the area
  4. Use these values to populate the source area model window.

Roughness parameters

In the UMEP plugin the roughness length and zero plane displacement length can be calculated with a morphometric method based on the Rule of Thumb (Grimmond and Oke 1999) as the default. There are other methods available: Bottema (1995), Kanda et al. (2013), Macdonald et al. (1998), Millward-Hopkins et al. (2011) and Raupach (1994, 1995). Many of these have been developed for urban roughness elements. The Raupach method was originally intended for forested areas but has also been found to perform well for urban areas.

With wind profile and eddy covariance anemometric data and the source area model, appropriate parameters can be determined and morphometric methods assessed (e.g. Kent et al. 2017).

Questions for you to explore with UMEP: Source Area

  1. What is the impact of the atmospheric and surface characteristics on the source area dimensions?
  2. How do the source area characteristics vary for different sensor levels for the wind profile?

Potential Projects

  1. How do the morphometric roughness methods compare with values obtained in the observatory? What is the influence of vegetation state?
  2. Does wind direction impact the choice of the most appropriate method?
  3. What is the difference in source area with models?
  4. What inputs are the respective models most sensitive to?


Contributors to the material covered

University of Reading: Christoph Kent, Simone Kotthaus, Sue Grimmond University of Gothenburg: Fredrik Lindberg Background work also comes from: UBC (Andreas Christen); Germany: Kormann and Meixner (2001); Japan: Kanda et al. (2013); UK: Millward-Hopkins et al. (2011), Macdonald et al. (1998); Australia: Raupach (1994, 1995); Netherlands: Bottema (1995)

Authors of this document: Kent, Grimmond (2016). Lindberg

UMEP Repository